Hillrom and Welch Allyn are a part of Baxter.
Item #: 2C1155KP
Infusor LV 2,3,5:
Nominal Flow Rate- 2,3,5 mL/h:
Accuracy- +/- 10%:
Calibrating Diluent- D5W:
Calibrating Temperature- 33.3 Celsius:
Nominal + Residual Volume- 240 mL + 3 mL:
Maximum Volume- 300 mL:
Nominal Delivery Time- 120-80-48 hours
Item #: 2C1168K
Infusor XLV 8:
Nominal Flow Rate- 8mL/h:
Accuracy- +/- 15%:
Calibrating Diluent- NS:
Calibrating Temperature- 31.1 Celsius:
Nominal + Residual Volume- 576 mL +5mL:
Maximum Volume- 600 mL
Nominal Delivery Time- 3 days
Item #: 2C2117K
NDEHP Intermate SV 100
Nominal Flow Rate- 100 mL/h
Accuracy- +/- 15%
Calibrating Diluent- NS
Calibrating Temperature- 21.1 Celsius
Nominal + Residual Volume- 100mL + 1 mL
Maximum Volume- 105 mL
Nominal Delivery Time- 1 hour
Item #: 2C2118K
NDEHP Intermate SV 200
Nominal Flow Rate: 200 mL/h
Accuracy: +/- 15%
Calibrating Diluent: NS
Calibrating Temperature: 21.1 Celsius
Nominal + Residual Volume: 100 mL + 1 mL
Maximum Volume: 105 mL
Nominal Delivery Time: 30 minutes
Item #: H93824
REPEATER Pump Syringe Filling Fixture. Holds pump tube set for filling single syringes or other luer devices. Suction feet hold the fixture securely to base of laminar flow hood. Clear anodized aluminum, 2” x 2.5” x 3.5’’ (51 mm x 64 mm x 89 mm)
CONTINU-FLO Solution Set with Non-Vented, 3 CLEARLINK Luer Activated Valves, Backcheck Valve and Male Luer Lock Adapter with Retractable Collar. Approximately 10 drops/mL. Approximate Length 109" (2.8 m). Non-DEHP. Fluid path is sterile, nonpyrogenic.
Item #: 2N3363
Light Resistant Micro-Volume Extension Set with Pinch Clamp Tubing ID 0.5mm Priming Volume 0.40mL Length 150cm
Item #: 2C6250
Dual Luer Lock Cap Male/Female Port Protector. No open fluid path. This product does not contain PVC or DEHP. Single Use Only. Sterile package, Nonpyrogenic.
Item #: H93821
REPEATER Pump Tube Set. Luer Lock-Luer Lock. Male Luer Lock connections allow needle, luer lock spike or dispensing pin to be used at the inlet and outlet. Use to transfer sterile fluids from one container to another using a REPEATER Pump. Sterile Package (1/Pack 10/Case)
Item #: H938174
Automated Compounding Device Inlet. Vented, High-Volume Inlet for Non-Vented Bottles. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.
Material per IFU:
Inlet Connector: ABS
Tubing: Non-DEHP PVC
Outlet Connector: TPE
Materials: Acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), thermoplastic elastomer (TPE), polycarbonate (PC)
Item #: H93842701
RAPIDFILL Connector, Luer Lock-to-Oral Slip, Clear. Connect EXACTAMED Oral Dispensers to luer fitting devices. Non-sterile
Item #: H93842000
Universal Bottle Adapter, Graduated Plug with Orifice and Tethered Closure. Fits bottles with neck openings of 13 m to 22 mm. For use with EXACTAMED Oral Liquid Dispensers. Non-Sterile (25/Pack 100/Case)
Item #: H93852300
Tamper Evident Oral Dispenser Cap. Three-part plastic cap used to indicate tampering on an EXACTAMED Oral Dispenser. Secure, non-sterile cap requires user to break off outer sleeve to dispense medication. A red ring remains in place, indicating the outer sleeve has been removed.
Sterile EXACTAMIX 2400 Valve Set. For use with EXACTMIX 2400 Compounder only. Used to connect up to 24 Source Ingredients. Sterile. Non-DEHP. Material per IFU: Port Caps: PVC (polyvinyl chloride)
Item #: H938901
EVA Dual Chamber Empty Container, 1500 mL Total Capacity. 250 mL upper chamber, 1250 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP.
Material per IFU:
Bag: Ethylene-vinyl acetate (EVA)
Fill Port:
Tube: EVA
Connector/Cap: acrylonitrile butadiene styrene (ABS)
Administration Port: EVA: DEHP-free polyvinyl chloride (PVC)
Additive Port:
Tube: EVA
Septum: Poly-isoprene rubber
Cap / Septum retaining ring: polypropylene
Non-Reopening Clamp: Styrene-butadiene copolymer
Item #: H938905
EVA Dual Chamber Empty Container, 3000 mL Total Capacity. 500 mL upper chamber, 2500 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP.
Material per IFU:
Bag: Ethylene-vinyl acetate (EVA)
Fill Port:
Tube: EVA
Connector/Cap: acrylonitrile butadiene styrene (ABS)
Administration Port: EVA: DEHP-free polyvinyl chloride (PVC)
Additive Port:
Tube: EVA
Septum: Poly-isoprene rubber
Cap / Septum retaining ring: polypropylene
Non-Reopening Clamp: Styrene-butadiene copolymer
Added to Your Cart
Product Availability by Store Location
Hours


