6-Leg 25"" Steel Base IV Pole • 8-hook rake top • Premium soft rubber casters with 3"" ball bearings • Telescoping stainless steel IV pole with slow descending inner pole - 99"" fully extended - 68"" compressed.

Tiered Rake Top (8 hooks), with lower secondary hooks. 1/4" round polished stainless steel.

Horizontal Triple Pump Carrier • Handle to support ease of transport • Speed clamp • CSA 60601-1 compliant 6 outlet electrical strip

Tandem Carrier for IV Pole for SIGMA Spectrum Infusion System.

Oral Labels. Pre-printed Pin-feed Labels for Identification of Oral Medications. “ORAL” imprint in large, faded pink color letters. 2" x 0.5". (50 x 15 mm). (1000/Case)

CONTINU-FLO Solution Set with Non-Vented, 3 CLEARLINK Luer Activated Valves, Backcheck Valve and Male Luer Lock Adapter with Retractable Collar. Approximately 10 drops/mL. Approximate Length 109" (2.8 m). Non-DEHP. Fluid path is sterile, nonpyrogenic.

Light Resistant Micro-Volume Extension Set with Pinch Clamp Tubing ID 0.5mm Priming Volume 0.40mL Length 150cm

Dual Luer Lock Cap Male/Female Port Protector. No open fluid path. This product does not contain PVC or DEHP. Single Use Only. Sterile package, Nonpyrogenic.

RAPIDFILL Connector, Luer Lock-to-Oral Slip, Clear. Connect EXACTAMED Oral Dispensers to luer fitting devices. Non-sterile

Universal Bottle Adapter, Graduated Plug with Orifice and Tethered Closure. Fits bottles with neck openings of 13 m to 22 mm. For use with EXACTAMED Oral Liquid Dispensers. Non-Sterile (25/Pack 100/Case)

Tamper Evident Oral Dispenser Cap. Three-part plastic cap used to indicate tampering on an EXACTAMED Oral Dispenser. Secure, non-sterile cap requires user to break off outer sleeve to dispense medication. A red ring remains in place, indicating the outer sleeve has been removed.

EVA Dual Chamber Empty Container, 1500 mL Total Capacity. 250 mL upper chamber, 1250 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

EVA Dual Chamber Empty Container, 3000 mL Total Capacity. 500 mL upper chamber, 2500 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

Infusor SV 1,2,3: Nominal Flow Rate- 1,2,3 mL/h: Accuracy- +/- 10%: Calibrating Diluent- D5W: Calibrating Temperature- 33.3 Celsius: Nominal + Residual Volume- 96 mL + 1 mL: Maximum Volume- 130 mL: Nominal Delivery Time- 96-48-32 hours

Infusor LV 2,3,5: Nominal Flow Rate- 2,3,5 mL/h: Accuracy- +/- 10%: Calibrating Diluent- D5W: Calibrating Temperature- 33.3 Celsius: Nominal + Residual Volume- 240 mL + 3 mL: Maximum Volume- 300 mL: Nominal Delivery Time- 120-80-48 hours

Infusor XLV 8: Nominal Flow Rate- 8mL/h: Accuracy- +/- 15%: Calibrating Diluent- NS: Calibrating Temperature- 31.1 Celsius: Nominal + Residual Volume- 576 mL +5mL: Maximum Volume- 600 mL Nominal Delivery Time- 3 days

NDEHP Intermate SV 200 Nominal Flow Rate: 200 mL/h Accuracy: +/- 15% Calibrating Diluent: NS Calibrating Temperature: 21.1 Celsius Nominal + Residual Volume: 100 mL + 1 mL Maximum Volume: 105 mL Nominal Delivery Time: 30 minutes

NDEHP Intermate LV 100 Nominal Flow Rate: 100 mL/h Accuracy: +/- 15% Calibrating Diluent: NS Calibrating Temperature: 21.1 Celsius Nominal + Residual Volume: 250 mL + 3 mL Maximum Volume: 275 mL Nominal Delivery Time: 2.5 hours