Automated Compounding Device Inlet. Non-Vented High Volume Inlet for bags or vented bottles. Tubing sets with push-on connector on one end (to attach to the fluid selector valve) and a spike or other appropriate connector on the opposite end to attach the source container. Sterile. Non-DEHP. Material per IFU: Inlet Connector: Rigid PVC Tubing: Non-DEHP PVC Outlet Connector: TPE Materials: Acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), thermoplastic elastomer (TPE), polycarbonate (PC)

Automated Compounding Device Inlet. Vented, Micro-Volume Inlet for use with Small Vials. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP. Material per IFU: Inlet Connector: ABS Tubing: Non-DEHP PVC Outlet Connector: TPE Materials: Acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), thermoplastic elastomer (TPE), polycarbonate (PC)

Automated Compounding Device Inlet. Micro-Volume Inlet with Luer Lock End. For use with syringes. Tubing set with push-on connector on one end to attach to valve set and a luer lock on the opposite end to attach the source container. Sterile. Non-DEHP. Material per IFU: Inlet Connector: ABS Tubing: Non-DEHP PVC Outlet Connector: TPE Materials: Acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), thermoplastic elastomer (TPE), polycarbonate (PC)

Luer Lock Universal Spike with a Female Luer Lock Connector. Use for additions and withdrawals from IV bags or bottles. Sterile Package (20/Case)

REPEATER Pump Bag Pole. Stainless steel pole connects to the REPEATER Pump to hold a bag and tube set. Insert the straight length of pole into the vertical mount hole, adjust to desired height, and tighten thumbscrew.

REPEATER Pump Tube Set. Luer Lock-Luer Lock, Low Volume Priming, External Thread. Use to transfer sterile fluids from one container to another using a REPEATER Pump. Sterile Package (1/Pack 10/Case)

MARK A DOSE LABEL

EXACTAMED Dispensing Pin, Sheathed Plastic with 3 Micron Filtered Vent (hydrophobic, olephobic). Sterile.

Admix Dispensing Pin, Molded Plastic Spike with 0.2 Micron Filtered Vent (hydrophobic) and Tethered Cap. Sterile.

RAPIDFILL Connector, Luer Lock-to-Oral Slip Connection, Clear. For filling sterile EXACTAMED Dispensers from a luer connection (i.e., luer syringe, repeating syringe or tube set). Individually packaged. Sterile Package (1/Pack 50/Case)

REPEATER Pharmacy Pump Stand. Base frame with 5 wheels and plastic casters with position locks. 32” height when assembled

REPEATER Pump Tube Set with Three Universal Vented Spikes with Luer Lock, Internal Thread. For high-speed reconstitution or fluid transfers from three bags or bottles of fill solutions using a REPEATER Pump. Sterile Package (1/Pack 10/Case)

REPEATER Pump Tube Set with Two Universal Vented Spikes with Luer Lock, Internal Thread. For high-speed reconstitution or fluid transfers from two bags or bottles of fill solutions using a REPEATER Pump. Sterile Package (1/Pack 10/Case)

EXACTAMIX Large Bore Cap, External Thread. Threaded cap for closing container-filling tubes and bag ports. Sterile. Non-DEHP. Material per IFU: Acrylonitrile butadine styrene (ABS)

Luer Lock Tip Cap for standard luer lock syringes. Red, Packaged Individually. Sterile Package

EXACTAMIX Empty EVA (ethylene vinyl acetate) Calibration Bag, 1000 mL. Sterile Fluid Path. Non-DEHP. Used for calibration during the setup of an automated compounding device. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

Automated Compounding Device Inlet. Micro-Volume Inlet with Large Bore Spike. Tubing set with push-on connector on one end to attach to the valve set and a large bore spike on the opposite end to attach the source container. For use with EXACTAMIX Compounders. Sterile. Non-DEHP. Material per IFU: Inlet Connector: ABS Tubing: Non-DEHP PVC Outlet Connector: TPE Materials: Acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), thermoplastic elastomer (TPE), polycarbonate (PC)

Sterile EXACTAMIX 1200 Valve Set. For use with EXACTAMIX 1200 Compounder only. Used to connect up to 12 Source Ingredients. Sterile. Non-DEHP.